Wednesday, September 14, 2011

How do you change your headlight assembly in your Chevy Colorado?

Notice: Avoid touching the bulb or letting the bulb come in contact with anything damp. Oil from your skin or moisture on the bulb can cause the bulb to explode when the bulb is turned on. If either comes in contact with the bulb, clean the bulb with alcohol or a suitable degreaser and wipe the bulb dry.



Ensure that the headlamp switch is in the OFF position.

Ensure that the ignition switch is in the LOCK position.

Remove the front grille.

Remove the bolts that retain the headlamp.







Push and rotate the park lamp, high beam headlamp, low beam headlamp, or the DRL, Park and turn signal, and front side marker bulb 1/4 turn counterclockwise in order to remove the bulb.

Disconnect the electrical connector.

Installation Procedure









Connect the electrical connector to the bulb.

Push in and rotate the park lamp, high beam headlamp, low beam headlamp, or the DRL, Park and turn signal, and front side marker bulb 1/4 turn clockwise in order to install the bulb.





Install the bolts that retain the headlamp.



Tighten

Tighten the bolts to 10 N路m (89 in lb).



Inspect the headlamps for proper operation.

Install the front grille.How do you change your headlight assembly in your Chevy Colorado?Drop by your local GMC or Chevy store and ask for one of the shop service personnel to show you how. You can also call Chevy at 1-800-222-1020How do you change your headlight assembly in your Chevy Colorado?it unbolts from the back of it,,remove all the bolts,,and the wiring harness from it,,and remove it,,installation,,is the reverse of this,,be care full the new one may try to bind on you,,take your time doing it,,and you,ll be ok with it,,good luck,,i hope this help,s.

No comments:

Post a Comment