Friday, September 23, 2011

How do you change your headlight bulb on a 2008 nissan altima?

does anyone know how to change the headlight bulb on a 2008 nissan altima? there is know way go get your hand in there to change it the frame is in the way.How do you change your headlight bulb on a 2008 nissan altima?Hard to explain on the internet but you will have to remove some parts to get to it. Just take it to your dealer. It is under warranty.

How do you change your headlight bulb on a 2008 nissan altima?

does anyone know how to change the headlight bulb on a 2008 nissan altima? there is know way go get your hand in there to change it the frame is in the way.How do you change your headlight bulb on a 2008 nissan altima?Bah, take it in to a Nissan service department. 3 year 36000 mile warranty. The headlamp bulb shouldn't be going out already.

How do I change the headlight bulb on a clio?

\its cheaper and quicker just to buy a new clioHow do I change the headlight bulb on a clio?Damned awkward, had to do it for my daughter. Depends which side it's on. If it is on the Battery side, remove the battery cover then you can actually get at the back of the headlamp fitting and pull it out. Believe me it is a real pain to get out and to get back in.How do I change the headlight bulb on a clio?GET SOMEONE ELSE TO DO IT,

How do I change the headlight bulbs on my 2007 yukon.?

Open the Hood, locate where the bulb is and there is a plastic clip that must be pulled back on to relese the lock to remove the wires going to it, then you simply twist the round perferated piece that holds the bulb in place.

The Bulb has a rubber O-Ring around it to seal it from water getting in it may be very tight, wiggle it from side to side as you pull.

They are not bad to change. It is a bigger pain to get at many of them.

DonHow do I change the headlight bulbs on my 2007 yukon.?Lift hood and locate the two removable pins in the composite headlamps. Pull them up and out. The whole headlamp will now be free to be removed and the bulbs are held in by a locking tab and a slight screw motion.How do I change the headlight bulbs on my 2007 yukon.?its kinda hrad to make this answer look long but all you do is go into super k or wallmaart and say the same thing u just said. id go to superk their employees no what there doin

How do i change the headlight on my 1996 Dodge Ram truck?

If I am not mistaken, this model has a replaceable bulb as opposed to a sealed beam. You should be able to remove the bulb from behind the headlight assembly by twisting the socket gently counter clockwise and sliding it out. Remove the old bulb from the socket and plug in a new bulb. It is best not to touch the new bulb with your bare fingers because the skin oils will shorten the bulbs life.



Handle the new bulb with a clean cloth or paper towel. After you insert the bulb securely in the socket, carefully reinstall the socket and twist it clockwise to lock it in place. Test the headlights.



.
  • web hosting servers
  • why am i skint
  • How do i change the headlight on a 2001 ford escape?

    It's a halogen bulb. Just unplug the wires from the bulb. Then there is a locking ring that holds the bulb in. Just turn it to the left and it will come off. Pull the bulb out. They have o-rings on them and sometimes stick in the plastic housing. May have to tug on it a bit.How do i change the headlight on a 2001 ford escape?Pop up the hood. Behind the headlight were the wire is attached is a collar that holds the bulb inside. Turn the collar counterclockwise and pull it out.

    How do I change a headlight on a 94 Nissan ultimo?

    my husband says if its the bulb their is normally a little clip to pull and it should open and screw out

    Is it fairly easy to change the low beam headlight for a 2004 Toyota Camry? If so, how?

    I haven't looked under the hood yet, but was just curious if it was difficult. I've heard you don't need any tools and only need to reach behind the casing and select the correct light to change and then properly remove it. Is this the case? Thanks!Is it fairly easy to change the low beam headlight for a 2004 Toyota Camry? If so, how?On most newer cars the head lights are just bulbs that you replace by removing them from the back of the headlight unit. You will turn the socket (usually counterclockwise) and then pull it out. Then just replace the bulb and put it back in. If you can not get to the back of the headlight housing, you will need to release the housing for access.Is it fairly easy to change the low beam headlight for a 2004 Toyota Camry? If so, how?it's easy and can be done in 2 minutes. your hands and fingers may get dirty, so wear some latex gloves.

    How can i change a dead headlight bulb specifically on a 93 acura integra?

    on headlamp is out, but the brights still work. tried to do it myself, but when i tried to get the bulb out from the car, it bulb holder wouldn't budge to come out, only the electrical plug to it. im thinking to take it to a place such as jiffy lube. how much would this cost? it seems like an easy doit yourself fix though. advance thanks for any helpHow can i change a dead headlight bulb specifically on a 93 acura integra?You'll need to remove the bulb from behind the headlight. You can do this by taking the fan shroud off and removing the bulbs from the wire harness.



    There is a retaining ring on the backside and you usually twist it to get it loose. If you take it to auto zone or someplace like that they will probably do it for free.

    How do I change headlight bulb (citron saxo year 2000)?

    it is the left hand side main headlight bulbHow do I change headlight bulb (citron saxo year 2000)?open the bonnet and there should be a flap to get you into the headlight or u can just pull the bulb out, perhaps some clips holding it in.. have a look...they're not hard to changeHow do I change headlight bulb (citron saxo year 2000)?You have to be double jointed, but the bulb is behind a cover and held in place with a sprung wire.



    1 - identify which bulb it is (if you have a separate side light in the headlight casing)



    2 - flip or twist the cover of the back of the headlight enclosure (from inside the engine compartment)



    3 - pull the wires off the back of the bulb



    4 - feel for the retaining clip holding the bulb in place, give it a squeeze and pull it back. (it wont fall off - its connected to the headlight enclosure - or should be!)



    5 - take out bulb



    6 - put the new bulb in, it will only go in one way, so twist the bulb a bit and you will find it sits in a couple of slots (this is to make sure your headlight beams are aligned properly and you don't blind other drivers)



    7 - Put it all back together!

  • how to break up with a boyfriend
  • vb
  • Do you have to remove bumper of the Clio 2002 to change the nearside headlight ?

    If so, how do you remove the bumper ?Do you have to remove bumper of the Clio 2002 to change the nearside headlight ?You should not have to remove the cover to replace the headlight.

    Need to know how to change headlight on burgman 400 need a diagram if possible?

    I have the 650 model and I have to take the handlebar cover, front storage cover and the rubber cap off. I hope the 400 is easier.Need to know how to change headlight on burgman 400 need a diagram if possible?It's probably fairly simple and I'm sure your local dealer would show you how it's done. It wont hurt to ask.

    How do you change the headlight bulb on a 1994 Toyota tercel?

    I'm cluelessHow do you change the headlight bulb on a 1994 Toyota tercel?if u have the plastic headlight then from inside the engine compartment. its usually tight and cramped so the smaller a hand the easier it is to replace it. usually there's a black or grey collar and u just turn it and pull the bulb out. if u have the glass lamps then u need to undo the four screws on the front trim holding the light in and then take the trim off and the light and replace the whole light.How do you change the headlight bulb on a 1994 Toyota tercel?Lefty loosey Righty tighty

    thats the way i go with thingsHow do you change the headlight bulb on a 1994 Toyota tercel?type into search box

    how to replace head light bulb 1994 Toyota tercelHow do you change the headlight bulb on a 1994 Toyota tercel?don't know

    Change the headlight bulbs on a 2002 Nissan Altima?

    I am not very knowledgeable when it comes to cars. I need to replace the bulbs for my headlights. The Nissan manual says to take it to the dealer. How much would they charge for something like that? Is it easier to do it myself without breaking something else? It looks like you have to move certain pieces to get to the light? Any advice from someone who knows about this car%26gt;Change the headlight bulbs on a 2002 Nissan Altima?1. You need to find the size for your car (check here http://www.sylvania.com/ConsumerProducts

    2. If installing it yourself, make sure you wear gloves and DO NOT touch the bulbs with your fingers if you're not wearing gloves.

    3. It's pretty simple, just take out the plug that connects to the bulbs, then take the bulbs out carefully and replace and plug back in.Change the headlight bulbs on a 2002 Nissan Altima?Actually first couple of years Altima's had a Grounding issue reacall. NTB05-057 %26quot; PB135 %26quot; Please get you car back to the dealer to catch up with the recalls and service campaigns. I am just guessing here it is the low beam light(s) that are not working. High beam lamps are harder to change. With a little luck you may end up with a new headlight assembly.

    ASAP please...How can i change my headlight bulbs on my 1997 mitsubishi eclipse gs?

    I just brought brand new headlight bulb that are blue for my car and i want to replace the orignal ones now so how do i install my new healdlight bulbs?



    thanks you..ASAP please...How can i change my headlight bulbs on my 1997 mitsubishi eclipse gs?you need to pop the hood and unscrew the headlights from inside and pop the bulb out and replace it from there.ASAP please...How can i change my headlight bulbs on my 1997 mitsubishi eclipse gs?ask ben franklin... i heard hes good with electricity and light bulbs
  • do at a tanning salon
  • fix a crack laptop blind
  • How do you change a headlight in a 1998 buick century?

    go to the autozone, ask to buy a headlight for the car. They will look in their book and show you what the number is and might even take it off the rack for you. Ask them how it's replaced. It's really a simple job, unplug, twist the bulb and plug in the new bulb, twist and hook up the hot wire, test it and you're ready to go.

    How do you change the headlight in a 93 Toyota Tercel?

    If you are referring to just the bulb, if you find the wires running to the headlight, it should be as simple as a quarter to half turn counter-clockwise and the harness, with bulb, should slide out of the housing. Then you take the bulb out of the harness, put a new bulb in, slide it back into the housing, and a quarter to half turn clockwise locks it back in place.

    How do you change the headlight bulb in a 1998 toyota camry?

    any picture/diagram links would be appreciated as wellHow do you change the headlight bulb in a 1998 toyota camry?first unplug bulb, if there is a round plastic clip that the plud went into, twist it counter clockwise and remove bulb. if there is a rubber boot covering bulb, pull boot it will come off, you will see a piece of wire bent around and have a handle looking piece on it. it is hooked onto another piece of metal, unhook wire from other piece of metal and pull bulb out, reverse instructions for installations.

    good luck i hope this helps.How do you change the headlight bulb in a 1998 toyota camry?Once the hood is open you will see a round plastic housing right behind the light, it unscrews and the light comes right out, just pull the tabs back and the bulb comes out..pop in the new bulb, put the light back in the spot you unscrewed it from and tighten it up again by hand and there you go..



    could not find a picture sorry

    How do i change a headlight bulb (right side) on a 2001 cadillac?

    there's no space behind it to get your hand in, and there's no screws holding the lens on! thanks for any help.How do i change a headlight bulb (right side) on a 2001 cadillac?its actually really easy. all you have to do is pop the bulb out of its socket, its usually held in with a pressure ring that you just squeeze to re lease or twist out to unlock it, then you pull the bulb out of the socket and replace it then put the new bulb in the same way you took it out.

    good luck

    How to change a headlight for a 1996 nissan maxima?

    how to change a headlight for a 1996 nissan maximaHow to change a headlight for a 1996 nissan maxima?The bulb is placed in the back side of the light assembly. Remove the wire plug by releasing the lock.

    Turn the big plastic ring counter-clockwise remove the bulb.

    Pay attention to the ears of the ring %26amp; bulb when removing. Best to make a mark the ring.

    Replace with new one. DON%26quot;T touch the glass of the bulb.

    This will drastically shorten the life of it.

    Replace the ring,now the wire plug.How to change a headlight for a 1996 nissan maxima?Auto Zone's web site has instructions for most headlight replacements.How to change a headlight for a 1996 nissan maxima?http://autorepair.about.com/
  • howtofalloutoflovewithsomeone
  • shared hosting
  • How do i change the headlight bulb in my peugeot 206?

    open the bonnit and look for some retaining bolts and undo them (theres usually 3 0r 4) pull the lens out a bit and it should simply be a clip where the bulb and wires go into the lens cover. once out push the bulb in and twist it to the left then replace with a new one (ask halfords which bulb it is, they are quite handy) make sure you dont lose any bolts! do not listen to people who tell you to go to a garage, have a go yourself coz its common sense. good luckHow do i change the headlight bulb in my peugeot 206?If you are talking about the bulb behind where you add the window wash.

    Well this was the one I had the problem

    You can just pull the neck of the window wash bottle out there is a small clip to release it.

    Job done no more wash bottle in the way.My car is from 2005 don't know if theis works on all.

    Report Abuse

    How do i change the headlight bulb in my peugeot 206?I've been seeing a lot of questions about replacement parts. No offense but please don't be lazy and just simply ask your dealer or any mechanic shop, but better if it's your dealer's service center that does it for you.How do i change the headlight bulb in my peugeot 206?http://autorepair.about.com/cs/troubleshHow do i change the headlight bulb in my peugeot 206?there is 4 bolts under the bonet you also have to take the grill off the front but be careful becaue you might break the clips ive done that myself , once out you can accsess the bulbs



    Hope this helps

    I have a 1995 Dodge intrepid. I lost the owners manual. I just want to change a headlight but cant get to it?

    I cant open the casing to get to the light.I have a 1995 Dodge intrepid. I lost the owners manual. I just want to change a headlight but cant get to it?Take it to Wal-Mart - it is worth the $10 they charge - especially if you have big hands like I do.I have a 1995 Dodge intrepid. I lost the owners manual. I just want to change a headlight but cant get to it?Ask one of you friends..I have a 1995 Dodge intrepid. I lost the owners manual. I just want to change a headlight but cant get to it?heres a website where you can get a mew manual...hope it helps:

    https://zoddda01.extra.daimlerchrysler.com/data/public/wccs/wckbgp7net.nsf/3c8f0b3d20490d58852568cf005348c6/0cb3f95fccebca7f8525735200483a97?OpenDocument

    How do I get black shield off to change 2000 Pontiac Grand Am Se Headlight?

    I need to change the bulb in my grand Am's front left and right headlights. There is a black plastic shield that covers both of them and there is little circle screw clamp things that need to get taken out but they are like stuck. Im not sure if im doing this right? Please let me know thanksHow do I get black shield off to change 2000 Pontiac Grand Am Se Headlight?There a few plastic fasteners that have a pin down through them that you need to pull up on. They work like rivets but usually can be reused once you get the center pin out far enough so the fasteners come out.How do I get black shield off to change 2000 Pontiac Grand Am Se Headlight?i am not sure, try google for some ideas.

    thanksHow do I get black shield off to change 2000 Pontiac Grand Am Se Headlight?I don't think it's necessary to remove the cover, open the hood and you take the bulb out and change it right there.



    Are you sure? Every vehicle I've ever owned you just open the hood, and the wire harness is right there waving at me, I twist the bulb pull it out and then replace it, Check and see if that's not the case with your car then I'm sorry, I'm just trying to help,How do I get black shield off to change 2000 Pontiac Grand Am Se Headlight?Yea take the cover off and there are 2 clips that hold the whole head light in.. there much like my alero...



    email me if you need more help...



    also check out this web site for my info on your car..



    www.gaownersclub.com

    How to you change the headlight bulb in 2004 honda accord?

    It's a Honda, it never breaks down. If it does, then you are doing something wrong. Did you hit the head lights? Remove the cover, pull out the fixture, just pry it out with a big screw driver. Twist out the old bulb and reverse the process.

    How do I change a headlight on a 2005 Ford Taurus Station wagon?

    you need to take the whole headlamp assembly off.



    there's three bolts that you need to take off. remove the assembly. disconnect the wiring harness. remove the plastic ring from the assembly by turning it counterclockwise. then replace bulb.



    install in reverse orderHow do I change a headlight on a 2005 Ford Taurus Station wagon?On each side there is a single 8mm bolt and two clips. The bolt is towards the center of the vehicle, the clips drop down behind the headlight. They have an L-shape at the top, grasp the tab with pliers or lever it up with a flat blade screwdriver. They can get kind of stuck, just get both of them all the way out, remove the bolt, pull the light straight forward.How do I change a headlight on a 2005 Ford Taurus Station wagon?just brought it to the automotive place. Usually they just charge a little.Than do it by yourself cause more time and effort.
  • uploading bebo skin
  • blackhead eraser
  • How do I change a headlight bulb on a 1991 Ford Ranger.High beams work but drivers side low beam light is out.

    Do I actually pull the bulb from the housing or is there something else I need to do?I tried pulling it straight out and afraid the bulb will break in my hand.How do I change a headlight bulb on a 1991 Ford Ranger.High beams work but drivers side low beam light is out.you do not remove the bulb at all ..open the hood and in back of the light bulb there is a plug .push in and turn that and it should come out..then all you replace is the light itself..go out and purchase a new light and you will understand what i'm talking about..How do I change a headlight bulb on a 1991 Ford Ranger.High beams work but drivers side low beam light is out.The bulbs are hallogen bulbs and have low and high beam on one bulb. You have to twist the bulb to get it out. The disconnect and connect new bulb and line up notches and push in and turn. Be sure not to touch the actual bulb. Just a finger print can burn it out.How do I change a headlight bulb on a 1991 Ford Ranger.High beams work but drivers side low beam light is out.The halogen bulb, you should wipe it with isopropil 'Rubbing%26quot; alchohol anyway, somebody else might have touched it before you bought it

    How do you change a headlight bulb to a 2003 dodge dakota?

    i've pulled off the air vent that blocks access to the bulb, but there's a grey type of bracket over the bulb which i really have no idea how it comes off..How do you change a headlight bulb to a 2003 dodge dakota?It just twists off counterclockwise. It is very easy.

    How do I change the headlight lamp on my 2005 chevy malibu classic?

    Unplug the bulb from it's holder/connector.You will see there is a circular collar holding the bulb in place.Turn a quarter of a turn anti clockwise and it will detach from the headlight.Insert new bulb and do the reverse.Do NOT touch the glass with your fingers,because the oil on your fingers will cause a black spot on the bulb,which will make it blow.Use a paper towel.

    How to you change the headlight bulb in 2004 honda accord?

    From the factory service manual:

    1. For low or high beam headlight bulb, remove the inner fender panel, it is right behind the headlight. (a little plastic panel)

    2. Disconnect the 2 Prong connectors from the headlight.

    3. Turn the bulb socket 45 掳counterclockwise to remove the bulb.

    4. Install a new bulb in the reverse order of removal.



    About $10.00 bucks for the bulb and 24 minutes ($36.00) labor at a shop.

    How do i change a headlight bulb on toyota previa 1994?

    1.Open hood,wear gloves and DO NOT touch the bulb with bare hand if not wearing gloves.

    2.Unplug the power cord connecting to the bulbs

    3.Take out the bulbs carefully

    4.Put in the new bulbs, plug back in the connectors and you're ready to go.How do i change a headlight bulb on toyota previa 1994?very simple.

    Open hood

    look under hood and there should be a black plastic L shaped connection running from the back of the light.

    unscrew the L shaped piece and pull out broken light.

    replace light and screw back in.



    your done.
  • indian baby girl name
  • data into xsds
  • How do you change a left headlight and a front left indicator bulbs on a 2002 BMW 325i?

    Please post any photos and any recos on bulbs to be used.

    BMW E46 series with regular lighting system.

    ThanksHow do you change a left headlight and a front left indicator bulbs on a 2002 BMW 325i?Instructions for both are in the owners manual.



    If you don't have one, see link below.How do you change a left headlight and a front left indicator bulbs on a 2002 BMW 325i?If you have xenon headlamps you should be careful when changing the bulb. Make sure you purchase the correct application (D2S) and DONT TOUCH THE BULB when replacing it. If it's a standard halogen bulb then you still have to get the correct application the still do not touch the bulb end. Your fingerprints will cause it to burn in hot spots which will eventually lead to another burn out. Hopefully it's just a halogen because HID Xenon bulbs from factory are REALLy $$$$$$$$. I just replaced one of mine for $175, but you should never have to replace an HID bulb. It usually means there's something else wrong other than the bulb itself. To replace either or you have to remove the plastic caps on the reverse side of the headlight inside the engine compartment and twist out the bulb.



    Now for the indicator bulb there should be a hole with a screw down inside it on top of the housing where your hood sits. Stick a screw driver down there and unscrew it. It doesn't come out all the way!!! So don't force it. THen pull the whole housing out and turn the bulb connector a little to release the housing. ******When you slide the housing back into place make sure you don't tighten the screw down too much, you could crack the plactic Y looking piece that hold the whole housing in. Good Luck

    How to change a headlight in a new Volkswagen Beetle?

    i own a repair shop,and all you need is the bulb part of it,it just turns out from the back of it,and put the new one in it,be care full and don't touch the actual bulb part of it,your not supposed to touch them with your fingers hold it with a cloth rag or something but the old one just pulls out and the new on goes right in,and that's all there is to it,,good luck,i hope this help,s.How to change a headlight in a new Volkswagen Beetle?The headlight housing must be removed from the fender. 98-05 models have a plastic lever with a safety button. 06 and newer have a small metal locking pin 3/16%26quot; as a primary lock and a 4%26quot; metal lever as a secondary lock.

    Report Abuse

    How to change a headlight in a new Volkswagen Beetle?I would leave it to the ones who can do it - Go to your nearest VW dealer!How to change a headlight in a new Volkswagen Beetle?Take is back to the dealer. I tried to have Jiffy Lube change mine one time, and it's a whole complicated process. You have to pop some panel off, and you have to go through some compartment under the hood by the engine. Have fun with that - those lamps are expensive!How to change a headlight in a new Volkswagen Beetle?Go to your local parts house and buy the bulb and see if they will put it in for you. It would take 5 minutes to do and most do it for free.How to change a headlight in a new Volkswagen Beetle?I needed this on my NB and it was a major PITA. Local mechanic got it, eventually: it's mounted all in one piece and comes out only after a lot of messing around with the plastic buttons and doohickeys. And putting it back in was actually more time consuming!



    If I had to do it again, I'd take it to the dealer and pay 'em the $45 per hour... or $60, or whatever...



    But if you must do it yourself, check this out:How to change a headlight in a new Volkswagen Beetle?Remove cover of headlight, remove wiring connection. Remove the clip who hold headlight bulb in position and replaced with new one. Be careful to fit bulb in correct position. Then fit all back on. Done.How to change a headlight in a new Volkswagen Beetle?EASY. open the bonnet and you will see the fitting for the light inside. there is a clip holding the covers shut. pull open the clip and pull out the globes in their sockets. then just change them. BE CAREFUL NOT TO TOUCH THE GLOBE ON THE GLASS. good luck

    How do I change the driver side headlight on a 2003 Passat?

    There is an %26quot;air box%26quot; in the way.. I called the VW dealership, and they told me I have to bring it in. They want $210 to install each headlight. Can anyone give me some instructions on how to replace the headlight? The bulbs went out on both sides of my Passat. It sucks!How do I change the driver side headlight on a 2003 Passat?both headlamps out at the same time is common. on the back of the lamp there is a rubber cap that just slips on. remove the cap and rotate the bulbs counter clockwise to remove. leave the wiring connecter on the bulb to hold the retainer on to make removal and installation easier. also inspect the yellow and brown wires to the bulbs for signs of excessive heat. somtimes the wires will melt and cause a poor connection.How do I change the driver side headlight on a 2003 Passat?damn German piece of ****....How do I change the driver side headlight on a 2003 Passat?Yup, Passats are infamous for burned out lights. My company had one and they just had to suck it up an pay. I never could figure out how to change them either. Them friggin things burn out way too often. Quality German engineering my ***.How do I change the driver side headlight on a 2003 Passat?both sides,,? this very seldom ever happens,,id check the fuses first,,if it did happen,,you can get them out once you raise the hood,all you need to do is replace the bulb part of it,,remove the lock ring ,and remove the socket and the bulb,,don't touch the new bulb with you hands either if you do wipe it off really good,it will make it blow if you don't,,good luck hope this help,s

    Whats the best way to change/replace the headlight on my 1995 Accord?

    Are there any special tools or instructions?Whats the best way to change/replace the headlight on my 1995 Accord?if you're just changing the bulb, most bulbs are a tool-free twist lock type. you will have to remove anything that's in the way, though. and you'll need tools for that.



    DO NOT TOUCH THE BULB!! if you touch the glass, your finger oils will cause a hot spot on the bulb and it will burn out quick.

    How do I change the drivers side headlight bulb on a 1999 honda civic EX?

    I can't change the bulb because there are things in the way preventing me from reaching it. How do I remove these things in order to be able to change the bulb?How do I change the drivers side headlight bulb on a 1999 honda civic EX?The bulb should be reacheable from behind the headlamp. First disconnect the wire harness. Remove the rubber insulator. Reach in and unlock the wire latch holding the bulb. Then remove the old bulb and replace it with the new one.



    Follow these steps backwards to complete the job.



    Good luck!How do I change the drivers side headlight bulb on a 1999 honda civic EX?Thanks for the info... you're right it is reachable, but what pain to change out.... especially that drivers side headlight.

    Report Abuse

  • How to make a babys quilt
  • shampoo for colored hair
  • How do i change the headlight bulb on an Expert van? Are there any online manuals?

    Get an expert in to do it!



    Is it like some Renaults?



    Remove the wheel in the arch where the lightbulb is

    Open the bonnet and unscrew the black plastic cover from above the light mount

    Remove the little cap in the wheel arch to gain access to the light

    Unscrew the protection cap from the back of the mounting

    Before removing any lightbulbs, wiggle the back of the one you think is the problem and confirm by looking at the front as to which is moving

    CAREFULLY remove the metal clip from around the bulb by squeezing it either side of the bulb

    Carefully remove the wiring from the back of the bulb

    Take out the old bulb and insert a new one. It doesnt screw, it just sits - safely! Ensure it is square inside the bracket though

    Replace the clip around the bulb

    Add the wiring to the back of the bulb and test.

    How do I change the headlight bulbs in a 2004 Jeep Grand Cherokee?

    I believe those are the same as my 2000 jeep grand Cherokee. When you pop the hood and look down at the light there is one screw in the middle unscrew that it should be a really long screw with threading only at the bottom. Once that is out you have to grab both sides of the light and pull straight out to pop it off it's ball joint. This has proved difficult for me and I have been unable to actually get the light off. If you are able to get the entire light case off you then can take the headlight bulbs out and replace them. Good luckHow do I change the headlight bulbs in a 2004 Jeep Grand Cherokee?changing the bulb you will need to remove the small 7mm long bolt and then use a good size screwdriver to pop the head light housing from the hold down clips. put the screwdriver behind the housing and then pry using steady pressure good luck on your repair...How do I change the headlight bulbs in a 2004 Jeep Grand Cherokee?Jiggle the handle.How do I change the headlight bulbs in a 2004 Jeep Grand Cherokee?open the hood and remove the plastic top cover above the light and twist the outer ring on the headlight and then pull out bulb when puting in the new bulb do not touch the bulb with your fingers use gloves because the oil on you fingers will heat up the bulb and burn it out with in 2-4 days

    How do you change the headlight on a 2003 Jeep Grand Cherokee Laredo?

    Check in the glove compartment for the manual, look at table of contents or appendix...if not there buy one from auto zone or whatever auto parts store; Napa, Cragen etc., its worth it to have one if you own a jeep! Save money, buy a toyota next time. Ex-Jeep owner.How do you change the headlight on a 2003 Jeep Grand Cherokee Laredo?if you just need to change the bulb part of it raise the hood,,and you should be able to gain aces to it from the back of the light remove the retainer ring,,and pull out on the bulb.don't touch the new one,,the oil off your skin,,will shorten the life of it,,and cause it to burn out a lot faster,,then install it back like the other one came out,,and that's it,,your done,,good luck hope this help,s.

    How do I change the headlight bulb in a 2001 toyota Corolla?

    on the back side of the headlight assembly under the hood you will see a plug that has wires coming out of it. That plug will turn 60-90 degrees and then you can pull it back. the light bulb can be disconnected from the connection and the new one put in. reverse the procedures to put it back in. It could be a tight sqeeze to turn the plug and pull back on it in the engine comparment, but it can be done.

    How do you change a headlight on a 2003 mazda 6?

    the left headlight is not functioning although the other bulbs are ok. what is necessary to remove the casing? should the high beam be replaced at the same time even if it is working?How do you change a headlight on a 2003 mazda 6?You can go to your dealer or authorized service centers to change your headlights. Actually, your common grease monkey mechanics at gas stations are qualified to help you change headlights but it is safer to go with your dealer or an authorized service center.
  • Marine Fish
  • Looking for a Funky Duvet Cover
  • How do you remove the headlight housing to change a turn signal bulb in a ford focus?

    I've removed the two screws on top, but the black casing won't move so I can get between it and the lights to change the bulb.How do you remove the headlight housing to change a turn signal bulb in a ford focus?There must be a third *extended hex bolt buried down inside the headlight housing. It's there you just have to find it. Wish I could help ya! You've got the right idea as the entire headlight housing has to drop out to service the headlights and turn signals.



    If you really get stuck, go to a library and look up your specific model car in a Motors or Chilton's *big thick book.How do you remove the headlight housing to change a turn signal bulb in a ford focus?Hi, The cover should pullout enough to get at the bulb.Please go to the web site (ehow.com) and put in search for how to change front turn signal light for Ford focus. It will give you step by step directions .Good Luck.How do you remove the headlight housing to change a turn signal bulb in a ford focus?Check your owner's manual. It may show you how to do that and where your missing screw is.

    How to change headlight bulb in 07 GSXR 600?

    Look in the back of the front fairing, you will see a

    connector for each headlight, remove the connector, then

    remove the watershield. Unclip the retainer and remove

    the bulb. Do not touch the glass part of the bulb with your

    fingers. The oil from them will heat up and ruin you new

    bulb. Reverse the procedure to install. I have a GSXR 750.

    Is there anyway to change the way my headlight cut-off on my 2005 350z?

    i replaced the stock halogen headlights with 6000k hids. i had an installer do it for me. i finally figured out how to get to the bulbs but im not satified with the way they project out on the road. is there anyway to change the way they cut-off?Is there anyway to change the way my headlight cut-off on my 2005 350z?Not really, besides adjusting the headlights. You could look into upgrading to the 06-07 lights, my friend had a 03 , the 03-05 lights are the same. The 06-07 have a larger projector lens which project the light farther an cleaner.. also gives your headlights a much better look on/off. An there is no company that makes after market lights for the 350/370z, at least not in the US.Is there anyway to change the way my headlight cut-off on my 2005 350z?they are illegal without an automatic levelling device to control the beams you can adjust the beams with screws on the headlights

    How much does it cost to change the headlight bulbs on a 2001 Volvo S80?

    I work at a Volvo dealership and we don't charge any labor for light bulbs.How much does it cost to change the headlight bulbs on a 2001 Volvo S80?ok, it should not be more than $15.00 according to autozone.com. You might be able to get it for less than that if you do not mind shopping at Wal-Mart.



    Here is the link:



    http://www.autozone.com/selectedZip,4819



    hope that helps



    Hamada



    Well for Labor, yes that is fair, considering it should not take more than 15 minutes (maybe even less than 5 minutes). At that rate your hourly rate would be at least 40/Hr. Now is that fair? Sure a garage station would charge him at least double, but they have expenses too. So make the whole thing for $25 for parts and labor.



    Hope that helpsHow much does it cost to change the headlight bulbs on a 2001 Volvo S80?I think if I were doing it for my boss, I would not charge anything for the labor. Let him pay for the parts, but it never hurts to do a favor for the boss.How much does it cost to change the headlight bulbs on a 2001 Volvo S80?Bulbs are about $20.00 to $25.00 each. Dealerships usually have two different labor rates, they charge a lower labor rate for easy things such as bulbs, or a battery, or an oil change, menu pricing i guess you could call it. Anyways I'm a dealership volvo tech and two headlights parts and labor should run about $75.00. Of course different areas of the country have varying prices i'm sure.

    How do you change a headlight on a 2004 Dodge stratus?

    pop the hood, look at the back of the head light, there should be at least one socket where the wire runs into the lamp, you can turn this or it may snap in, then pull out the bulb put the new one in - try and not touch it with your fingers, the put it back in. the only hard part will be getting to come out of the lamp sometimes they get stuck and can be hard to turn or pop outHow do you change a headlight on a 2004 Dodge stratus?Turn the bulb holder on the back of the housing 1/4 turn and jiggle and pull out.How do you change a headlight on a 2004 Dodge stratus?You need to replace the light or the lens is broken. If it is the light you need to lift the hood and find the back of your headlight housing. There should be a white looking fitting with wires, that is your light. you can twist it with your hand and it will come out of the headlight housing/lens. Unplug the halogen light from the connector and replace with a new one and twist it back into place. If it is broken you may have a cracked lens that lets water into the housing and the lamp breaks because the water splashes on it and the sudden change of temp bursts the light.
  • asks for advice
  • find wildlife envelope seals
  • How do i change the headlight bulb on my peugeout 307?

    i have unclipped the connector, now i am stuck!How do i change the headlight bulb on my peugeout 307?Usually there's a bent-wire piece keeping the bulb in its exact working position. Press its terminals together and it will hinge up or to the side. The bulb can be removed by pulling it out.

    When installing a new one, make sure you don't touch the glass part or it won't last very long. To do that, use the cardboard, its plastic sheave or simply connect it first and then insert in position. When in place, it shouldn't be able to rotate or move - if it does, repeat the positioning until you find the exact position.

    Fit the wire piece, test if it works and replace the dust cover, if any.

    Monday, September 19, 2011

    How to change the bulb and aim a 97 Buick Skylark Headlight?

    My right headlight is burnt out. I need to know how to change the bulb. But most importantly I need to know how to aim the light.How to change the bulb and aim a 97 Buick Skylark Headlight?There is trim aroung the headlight, it needs to come off, unscrew the chrome ring around the headlight, it should pop out( the headlight) install the new one, attach the trim ring, put the trim around the headlight and the job is done, no need for adjusting it. GOOD LUCK

    How to change headlight on a 2002 Dodge Durango?

    1. Remove the small Torx head screw and detach the park/turn signal light housing. (Screws are located between headlight and signal housing)



    2. Remove headlight housing mounting bolts (there are 3 of them, 1 on the side and two on bottom)



    3. Disconnect the electrical connector, unscrew the headlight bulb-retaining ring and withdraw the bulb.



    4. Installation is the reverse of the romaval procedure, but handle the new bulb only with gloves or a clean rag.



    5. If you need to adjust the headlight, there are two spring loaded adjusting screws above the headlight but below the top of the fender. Adjust accordingly.How to change headlight on a 2002 Dodge Durango?You don't have to take the whole headlight out, I just changed my 2003's yesterday.



    You can reach the retaining ring on the back of the headlight, turn and take bulb with wire out, replace bulb, insert bulb and wire back into headlight and screw the retaining ring back on. It is a little awkward to reach the retaining ring, but it can be done, took me 5 minutes to do both.

    How do i change a headlight on a 1999 Ford Windstar??

    I need to replace itHow do i change a headlight on a 1999 Ford Windstar??to change the headlight you need to go under the hood and gain access from the back of the light assembly

    or you can look in your car manual

    How do i change my headlight bulb on a 2000 chevy malibu?

    open the hood, and take it out from the back, screw the bulb out and put another in, simple.How do i change my headlight bulb on a 2000 chevy malibu?Blow a guy that knows how to do it.How do i change my headlight bulb on a 2000 chevy malibu?pop the hood look behind the headlight that is blown and unscrew the black plastic piece. pull it out and there is your bulbHow do i change my headlight bulb on a 2000 chevy malibu?There should be a light module behind the head lamp that is made to replace.How do i change my headlight bulb on a 2000 chevy malibu?Yeah what they said............except the first.........
  • cute hair
  • removing contact lenses
  • I want to change the headlight on my 1982 750 Nighthawk, from round to rectangle. Can it be done?

    If this can be changed out, what model years will work?I want to change the headlight on my 1982 750 Nighthawk, from round to rectangle. Can it be done?You shouldjust upgrade to a 86 Nighthawk. They are pretty sporty, and hold their value.I want to change the headlight on my 1982 750 Nighthawk, from round to rectangle. Can it be done?you could but your gonna have to aftermarket the lite and come up with your own mounts. Learning to customize is half the fun.

    check this out, scroll down to head lites.

    http://www.customdynamics.com/motorcycle

    How do u change a headlight for chevy equinox with pictures?

    thank youHow do u change a headlight for chevy equinox with pictures?if its anything like my trailblazer, you open the hood and look at the back of the lamp there's a small wire harness should be the only one on the back. you twist it, pop it out and insert the new one. you can look online at the part before you start and if all else fails most parts stores put them on free.

    Should I change my headlight fluids in my 1982 Yugo?

    My mechanic told me he can do this for $39.99, said it's not in the manual but he does it alot just before winter- freezing and such.Should I change my headlight fluids in my 1982 Yugo?I own a repair shop, and your mechanic is ripping you off. Anyone who knows anything about Yugos knows full well that there are no %26quot;fluids%26quot; in headlights. There is only ONE fluid. It is shared by both headlights. But he is right, if the stuff freezes, the light will not come out of the lamps until the bulb heater warms up.Should I change my headlight fluids in my 1982 Yugo?got too much time on your hands thats for sureShould I change my headlight fluids in my 1982 Yugo?IdiotShould I change my headlight fluids in my 1982 Yugo?It is always a great idea to take out the summer air in your tires before winter as well. I know a guy here in PA who will do that for same price as headlight fluid change only $39.99. Ah hell I'll do both jobs for for $85 even , my friend.Should I change my headlight fluids in my 1982 Yugo?Make sure he greases your muffler gaskets too.



    And your battery probably needs tuned up.Should I change my headlight fluids in my 1982 Yugo?there is no head light fluid,he's lying or ypur messing aroundShould I change my headlight fluids in my 1982 Yugo?Heck yes.....and for $39.99 it's a bargain. Do you have any idea what it costs to replace Yogo headlights ? I didn't change the Breaklight fluid in my 1982 Yugo and it cost me $5538.99 to get it ok again. While your mechanic is at it have him change the windshield too...the washer fluid will ruin it if you have a summer windshield still on....boy are they expensive...I know. All in all my Yugo has been a great little car, and my mechanic makes a good liveing off tgem....shoot he works on 3 that I know of and he drives a Corvette.Should I change my headlight fluids in my 1982 Yugo?better find another mechanic!!!!!Should I change my headlight fluids in my 1982 Yugo?Fast find another mechanic,or he is pulling you leg.Next time you see him ask if he can grease you brakes so they wont squall. Tell him while he's at it to check your turn signal fluid. If it's not in the owners Manuel, he is like i said pulling your leg or is a crook.Should I change my headlight fluids in my 1982 Yugo?Sure,do the tail lights too.

    How to change a headlight bulb on a 2003 Nissan Altima.?

    The manual says take it to Nissan, but I want to do it myself. There's no easy spot to screw out the old lamp, pop the halogen bulb in, and then screw it back up. Any help out there, much appreciated!!How to change a headlight bulb on a 2003 Nissan Altima.?screw that easy way i do it at nissan is to remove bumper, way easier, and you dont mess up bulb or hand trying to reach in small places, to remove just take all the snap clips of top of bumper i think there is 6 then remove the screw in splash shield and peel back fender liner reach up inside there is two 10 mm bolts on each corner of headlight remove those on each light, then pull bumper out and down and let hang, then there is 4 10 mm securing headlight, remove then pull out headlight and change bulb, its not hard like it sounds but im an exp nissan tech and i have the lift to work on with out scrpaing up bumper, so you might want to take to nissan, its not hard at all , the other way the guy before me said is another way i just hate doing it that way and do it my way, there is a recall on the headlights just to let you know, they burn out from a bad ground if you take it to nissan they will do recall and install two new bulbs included for free, you should call with your vin to c if your car has had that done yet,How to change a headlight bulb on a 2003 Nissan Altima.?does one have to unplug the high voltage wires from module to light first? if other lights running lights, high beam are working does that mean it's not a module problem but a bulb problem?

    Report Abuse

    How to change a headlight bulb on a 2003 Nissan Altima.?I'll try and explain it, but if you still can't do it, go to www.altimas.net and search in the forum. It's not easy, on the passenger side bulb, remove your coolant reservoir. I believe it's 3 bolts. On the drivers side, I believe it's easier if you remove the top of your air box. (I have a cold air intake, so my whole air box assembly is gone) Once you have access to the white plastic cover, turn counterclockwise to remove the covers. Then the bulb is held in by a metal clip. If you look at it closely, you must push the clip towards the front of the car, then to the side, and the clip will release and you can then change the bulb. Then re-assemble...

    How do you get the cover off to change the headlight bulb on a ford festiva?

    This is how I change my Ford and may be the same for your car. I don't know for sure but it's worth a look see:

    Open hood. Look at back of headlamp for 2 clips that pull up (the clips don't come completely out). With the clips pulled up, pull out the lamp assembly from the car as far as the wires will reach.

    Twist the lightbulb socket until it releases from the headlamp unit.

    Now you can pull out the bad bulb from the socket and replace.

    Avoid touching the glass part of the new bulb with your fingers. Use a cloth or clean gloves. You don't want to leave any oil on it from your hands.How do you get the cover off to change the headlight bulb on a ford festiva?I don't really know but in my car you don't remove the cover. You raise the hood and it snaps in from the back of the light housing.
  • windows xp
  • career in management
  • Need to have my headlight bulb changed, if i buy it at napa or advance auto do they change it?

    I need to buy a new bulb for the headlight in my car, if i buy it from napa or advance will they change it for me?Need to have my headlight bulb changed, if i buy it at napa or advance auto do they change it?It isnt that hard chainging light bulbs, ITs pretty simple also, it'd be alot easier if i knew your car model but im going out on a limb here, Im guessing its recessed head light model. Open the hood now either you will encounter screws or little bolts, most likely screws, take the screws off take off the old bulb and put the new in and just work backwards. pretty simple! make sure you try them before you drive at night.Need to have my headlight bulb changed, if i buy it at napa or advance auto do they change it?No one is that lucky!Need to have my headlight bulb changed, if i buy it at napa or advance auto do they change it?NO THEY WILL NOT CHANGE THE BULB .....ON SOME VEHICLES IT REQUIRES EXTRA WORK BUT MOST ARE EASY FIXES UNLESS ITS A PONTIAC GRAND AMNeed to have my headlight bulb changed, if i buy it at napa or advance auto do they change it?if you ask reeeeeally nice they might but usually policy will not let them



    lights are usually easy to fix there is a retaining ring and a plug in the back under the hood





    unless it is a honda they have a clip for removing the bulbNeed to have my headlight bulb changed, if i buy it at napa or advance auto do they change it?the parts dude will go out to your car and tell you what to do to change the bulb and then you will know for next time ... be respectful and make a new friend and then you have lots of good and free info about your car................

    How do i change the headlight bulbs on my vauxhall tigra?

    are u blind? sorry baby but its not exactly a hard job, 1st lift up ur bonnet, then remove the headlight from inside, unscrew the light if my memorys right it should have 2pins on it if so they should just slide in and out pretty easily anymore trouble gve a shout take care maybe that was a little help to u i drive a mercedes e-class so our cars are a bit different but im also studying to be a mechanicHow do i change the headlight bulbs on my vauxhall tigra?cheers guys

    Report Abuse

    How do i change the headlight bulbs on my vauxhall tigra?thanx 4 voting

    Report Abuse

    How do i change the headlight bulbs on my vauxhall tigra?You don't, the bulb is worth more than the car. Toss the car in the bin and switch to public transport.How do i change the headlight bulbs on my vauxhall tigra?Open the glove box and look in the manual.How do i change the headlight bulbs on my vauxhall tigra?Get the handbook that will tell you. You can get it off the internet if you don't have it already.

    How do you change the headlight bulbs in a 97 Ford Contour?

    The headlight is a sealed unit, so you do not remove it, you twist and pull the bulb out from the back of the unit and replace the bulb.



    Note! It's a tight fit!!!





    FYI: The guy below me has the wrong info. There are no brackets to unscrew.....How do you change the headlight bulbs in a 97 Ford Contour?One at a time in the daylight. Ba-da-bum! Thanks, I'll be here all day. Don't forget to tip the waitresses.How do you change the headlight bulbs in a 97 Ford Contour?open the hood, unscrew the brackets, unplug the bulbs, then all in reverse.



    Someone would do it for you for like $10 I think.How do you change the headlight bulbs in a 97 Ford Contour?There actually is a retainer clip on the back of the headlamp that you have to twist off in order to get the bulb out, once you twist off the clip you can just pull the bulb out and unplug it.

    How do you change the headlight bulb 1996 Mondeo LX .?

    Any tips? I am told it is tricky. One version says remove the bumper to access the bottom boltHow do you change the headlight bulb 1996 Mondeo LX .?Its very fiddly to get into the back of the headlights you just have to have very nimble fingers to get the bulbs in.I had the 95 lx and it took a while but you will get there.It may sound daft but if you get a torch and shine it into the headlight you can see what your doing with the bulb and what way it needs to go.Taking the bumper off is only for replacing the headlights themselves or if you need to replace the lenses that you see going yellow and giving you poor visibility.How do you change the headlight bulb 1996 Mondeo LX .?It would be cheaper to buy another Mondeo!How do you change the headlight bulb 1996 Mondeo LX .?If its just a bulb your changing and not the headlight unit,then theres a plastic cover at the back which is tight but does come off if youve strong fingers?once you can see inside, you may need to use a smal mirror to see ,depending on which lamp your working on,(the one s nearest the wings are the dipped beams)pull off the wiring connection,look for a kind of wire that holds the bulb in.release that and the bulb will come out,but watch the shape of the bulb base as it has to go back the very same way!good luck!How do you change the headlight bulb 1996 Mondeo LX .?It shouldn't be that tricky, there should be an access panel from under the bonnet or maybe an access panel in the wheelarch.



    The lights will be housed in a plastic cover.



    The bulb should screw out with a quarter turn and a pull.

    How to change the headlight bulb for 94 honda accord?

    I have a 94 honda accord lx coupe, its passenger side low beam bulb needs to be replaced and i cannot put my hand there as its obstructed by the air filter i think.

    what should i do now ?How to change the headlight bulb for 94 honda accord?I know what you're talking about. My sister had a 96 Accord, and she would always make me change her bulbs.



    There is supposed to be some way that that black air intake scoop can be removed in order to get to the back of the bulb. If I recall correctly, I think it comes loose if you pull up on it. But it has to be removed to change the bulb.



    Good luck.How to change the headlight bulb for 94 honda accord?No problem, homie!

    Report Abuse

    How to change the headlight bulb for 94 honda accord?that's very easy, just first locate the bulb, on the back side, (under the hood) you will see a plastic connection to the bulb. Then twist and pull out the plastic connection, remove the old bulb, replace with the new one, good luck....
  • with children relationship
  • structuretoptr
  • Can any one explain to me how to change the headlight on a 99 kia sephia?

    I also need to know how to take the glass off to get to the light.Can any one explain to me how to change the headlight on a 99 kia sephia?Drive to an Autozone store. Walk in and purchase new headlight bulbs there. Ask that they install them. Job done with no dirty hands and a correct installation!Can any one explain to me how to change the headlight on a 99 kia sephia?You take the bulb out from the back. Look behind the headlight you should be able to see a small plastic cover that comes off under it will be a 3 pronged plug that is the bulb unplug it the bulb it sel will be held in place by a couple of wire clips squeeze them and move them out of the way pull out the old bulb put in the new bulb and replace everything in reverse order. Be careful not to touch the class of the new bulb.

    How do I change the headlight bezel for my 1996 F-250?

    I would like to take the XL black headlight trim out and put in the XLT chrome headlight trim in and don't know how to do it.

    How do I change the headlight bulbs on my Chrysler '00 Sebring Convertible?

    THESE BULBS SHOULD FIT. MY Q: is are the encasements sealed or do they pop out or do I have to un-seal and reseal?? so confusedHow do I change the headlight bulbs on my Chrysler '00 Sebring Convertible?they come out of the back of the light assembly ,gain access to the back of the light and you can remove them this way ,you don't have to break the seal on anything to get them out,good luck on it.How do I change the headlight bulbs on my Chrysler '00 Sebring Convertible?theres 3 screws per light. two with big heads and then one that will be in a hole with a long shaft. torx head. i think 25. take the screws out light pull straight forward. watch out for scratchin the bumper. don't force. they will slid out easy if you have the right screws pulled. the light wire should come right off just buy pullin it in the right direction. then twist out bulb. do not touch the bulb with your fingers. your oil on your fingers will shorten the life of the bulb.

    Change the headlight bulb for my car?

    I heard people said that if you touch the bulb with your hands, the bulb will burn out alot faster. What if I wear gloves when I install the light bulb, would that happen too? I'm gonna replace a burn out bulb on my car by myself the first time, want to make sure I do it correctly.



    And anyone know where I can buy headlight bulb except auto parts stores? Does Wal-mart sell them?Change the headlight bulb for my car?Touching the bulb with your bare hands will degrade the glass (because of the oil on your skin and other contaminants). Some new bulbs come with cardboard sleeves, don't remove the sleeves while installing the bulbs. If the new bulbs don't come with sleeves use a clean tissue instead. Your gloves might have contaminants that will degrade the glass, better to use a clean tissue.



    Also make sure the wattage matches the original bulbs i.e 60/55 watts high/low beam.



    Hope this helps.Change the headlight bulb for my car?YES WALLY WORLD SHOULD SELL THEM. IT IS THE ONLY ON OUR HANDS THE CAUSES THEM TO BURN OUT FASTER GLOVES WILL WORK OR JUST USE A CLEAN PIECE OF PAPER TOWEL CHANGE BOTH RIGHT AWAY. HOPE THIS HELPS AND GOOD LUCKChange the headlight bulb for my car?I've never heard that about touching a bulb. However, be sure to change both bulbs at the same time. You change just one and the other Will blow soon afterward. It's just the way it goes.

    Donnie can you help me change my headlight fluid?

    They need lubed up bad!Donnie can you help me change my headlight fluid?I' ve got some in the basement. There is a pump in front next to the door. while we're there we'll change the driveshaft fluidDonnie can you help me change my headlight fluid?I'm busy right now helping Floyd change his muffler bearings. And you are next in line after I help Ralph pull his engine with his sky hooks...... :) :) :)Donnie can you help me change my headlight fluid?You're back! I've missed you. Did your car break down. Crank it up. xxxDonnie can you help me change my headlight fluid?As soon as I change the coolant in my 63 VW Beetle....



    I guess your headlights squeak when you turn on the wipers?Donnie can you help me change my headlight fluid?Thats funny im low on blinker fluidDonnie can you help me change my headlight fluid?ill help you dear, as soon as i help john change the anti-freeze in his radio.
  • get rid of acne and blackheads
  • playing hd movies on computer
  • How do I change the headlight bulb on a 1994 Jeep Grand Cherokee Laredo 4wd 6 cylinder?

    Put it in the garageHow do I change the headlight bulb on a 1994 Jeep Grand Cherokee Laredo 4wd 6 cylinder?remove old blb and put int he new one......and if its not sealed beam make sure u dont touch the bulb use a paper towel....How do I change the headlight bulb on a 1994 Jeep Grand Cherokee Laredo 4wd 6 cylinder?If this Jeep has sealed beams,you have to replace the headlight itself. First,open the hood,then you remove the grille,then you can get to the retaining ring that holds the headlight in. These types can be tricky getting apart and might have hidden bolts.



    If it has the halogen bulb type,you open the hood,turn a knob type thing holding the bulb and remove the bulb.Don't touch the bulb with your hands.Body oil shortens the life of these bulbs

    How do I change the headlight on 2001 VW GTI VR6?

    The main light on passenger side burned out. Have replacement. Can't tell if I need to twist old light out or just pull straight out. I don't want to break anything. (This is the main light that goes behind that paper looking cover thing.)How do I change the headlight on 2001 VW GTI VR6?u need to take it out, the whole assembly then theres a clip in the back take it out and take the plastic off as u take the plastic off u will notice the bulbs and take it out.

    How do i Change the headlight in a 2000 pontiac Grand Prix?

    Ive got no idea.. Help please?How do i Change the headlight in a 2000 pontiac Grand Prix?Most all new car headlights are replaced from the rear of the assembly. Sometimes you have to pull the assembly out then turn the large knob / clamping nut. Then pull the socket out and the bulbs is pushed into the socket. Good Luck.

    How do I change the headlight bulb on a 1994 Jeep Grand Cherokee Laredo 4wd 6 cylinder?

    won't matter what you got for cylinders or 4wd. All you gotta do is pop the hood and inspect the back of the headlight. The bulb will pop out and you can just take it to a parts place and tell you need one. If you have an Actually headlight it works the same way, only you unplug the headlight, then take the bolts holding it in and it works the same way. Easy as pie, my kid sister could do it. If you ask real nice at a parts store they might show you, or even do it for you.How do I change the headlight bulb on a 1994 Jeep Grand Cherokee Laredo 4wd 6 cylinder?On the back of the lamp assembly there is a retainer. Turn this counter clock wise to release the bulb, remember how it's positioned. Pull the bulb out and unplug from the wire. Install in reverse. Don't get too rough with the retainer, it's plastic and they tend to break, if that happens they sell replacement ones at local auto part stores.How do I change the headlight bulb on a 1994 Jeep Grand Cherokee Laredo 4wd 6 cylinder?I don't know anything about your car, but on mine the bulbs come out from the back under the hood.

    How to change Volkswagen GTI headlight bulb?

    I own a 2000 GTI, and I want to replace the headlight bulbs with brighter ones. I was going to get Silvania Ultras, but are there any nice white and bright bulbs that you recommend that are not too pricy? Anyway, I looked under the hood, and there is a cover that comes off to access the bulbs. The bulb and wire are held in with like a thin metal wire clip. I was wondering how to remove the clip so I can get at the bulb. ThanksHow to change Volkswagen GTI headlight bulb?It's hard to explain over the internet. That wire clip is almost like a spring. You have to %26quot;bend%26quot; it around part of the housing holding the clip on. You really just have to get in there and take a look at it. Play around with the metal piece and you'll see.

    GOod luck :)!
  • hardware support
  • long hair styles
  • How do you change the headlight lightbulb on a 2006 Chevrolet Equinox?

    Not much help with those other answers, huh? Let's try this. You need to remove the headlamp. Kinda dumb, I know, but it's not that hard. First we gotta remove that trim piece that clips on in the middle of the headlight. Raise the hood and find the 4 push-in retainers that go along the top of the front grille. Then when you pop off that trim on the headlight you will have a little room to work with. Remove those retainers. Get a flat-bladed screwdriver and a rag, place the rag above or below the trim on the headlight. The rag will protect the headlight from getting scratched when you pry up on the trim with the screwdriver. The trim will pop out towards you. That should give you enough room to remove the headlight. There are two hex-headed screws right on top you can easily see holding the headlight and then one more if you lean in and look down further. Remove the 3 bolts. Now just wiggle and lift up on the headlight and it should come loose. You may need to unplug the side marker bulb wiring to give you more room. Keep the rag wrapped around the trim piece to again avoid scratching the headlamp. Then you will see the big round black plug cover to turn and remove to gain access to the bulb. The bulbs are halogen type bulbs so don't touch them with your hands. The oils from your skin will cause the bulbs to burn out prematurely. Use a clean cloth to handle the bulbs. Reinstall the headlamp the same way you removed it. You will see how it goes back in once you get it out.How do you change the headlight lightbulb on a 2006 Chevrolet Equinox?Yes - directions are indeed as indicated. Changed one of the main headlight bulbs in my 2005 Equinox in about 15 mins at a total cost of $7.

    Report Abuse

    How do you change the headlight lightbulb on a 2006 Chevrolet Equinox?Thank you for the detailed instructions, I contacted the dealership and they weren't very specific but very expensive. they wanted to charge $31.00 plus $90.00 in labor. I'm a female trying to get it done but couldn't find specific answers. You were a big help. thanks.

    Report Abuse

    How do you change the headlight lightbulb on a 2006 Chevrolet Equinox?Check the manual, for many newer cars you need to remove some of the trim or shroud that might be blocking the rear of the light assemblyHow do you change the headlight lightbulb on a 2006 Chevrolet Equinox?check your owners manualHow do you change the headlight lightbulb on a 2006 Chevrolet Equinox?Access to the bulb is usually the biggest issue. The bulb portion will %26quot;twist%26quot; out of the lamp housing if you can get to it. Note where the wires come into the back of the lamp. The bulb sits in it's own housing then fits into the lamp housing itself. Grab the bulb housing and twist. Sometimes you have to remove the lamp housing to gain access to the bulb. Based on the year though I would bet that your dealer would cover it. Headlamp bulbs have a much longer life than 1 or 2 years. If they won't do it take your vehicle to a collision repair facility. There labor rates are 25% cheaper than a dealer and they can buy the exact lamp from the dealer at the same list price. Takes about .5 hours or less to do by a tech.

    How do you change the headlight bulbs on a 2002 Pontiac Sunfire?

    Here are step by step instructions for a 2000. Should be the same or at least very similar to yours:



    http://www.autozone.com/az/cds/en_us/090How do you change the headlight bulbs on a 2002 Pontiac Sunfire?First you lift the hood than right behind the head lights you'll unscrew the screws and take off the heat wall than unscrew the bulbs and replace them with the new ones,just make sure you get the right size and the right amount of voltage.How do you change the headlight bulbs on a 2002 Pontiac Sunfire?Remove the two bolts on the radiator support that holds the headlight assembly in place. Pull the assembly out (foreward) to access the bulbs. Rotate the bulb holder counterclockwise and pull it out of the headlight housing. Unplug the electrical connector from the bulb. Reverse procedure to install.

    How do you change the headlight bulb on a 2000 Dodge Stratus?

    There are 2 long bolts that are at the top of the headlamp assembly. Take them out and the headlight assembly will come out. Then twist the thing where the light is and it will come out. You also will have to twist the blinker light so you can take the assembly all the way off. It's pretty easy I have a Dodge stratus and have changed the lights myself a couple times.How do you change the headlight bulb on a 2000 Dodge Stratus?If you are not sure take the car to AutoZone or a similar auto parts dealer and they will show you.



    Good LuckHow do you change the headlight bulb on a 2000 Dodge Stratus?take bolts out of headlight assy. and take bulub out then replace do not touch the new bulb w/ your bare hands it will cause it to bust

    How do I change the headlight bulbs in my 2001 chevrolet corvette?

    i own a repair shop,and you need to raise them up,and leave them up,and you should be able to go from behind them,or up through the bottom,and twist the socket out that holds the bulb in,,be care full and don't touch the new one with your fingers,and replace them,,there not bad to do you just don't want to get the oil from your skin on the new bulbs,it shortens the life of them,good luck,i hope this help,s.How do I change the headlight bulbs in my 2001 chevrolet corvette?read the owners manual luke

    How do I change the headlight bulbs on my 2002 Chevy Silverado?

    I just bought the truck and don't have any owner's manual. ThanksHow do I change the headlight bulbs on my 2002 Chevy Silverado?there are pins holding them in, twist the pin out of its lock then slide up and out, while you have the lights out check your daytime running lights. probably one out. watch while your driving it seem every Chevy truck has 1 bad daytime running lightHow do I change the headlight bulbs on my 2002 Chevy Silverado?pop the hood there will be 2 small metal pins holding the headlight Assembly in the truck remove these and the headlight assy. will come out then twist the bulbs out be sure not to touch the glass on the new bulb they are extremely sensitive to oils
  • channel
  • rodents
  • How do you change the headlight on a 2007 GMC sierra pickup?

    My low beam went out and I bought a replacement but I cant seem to get to the housing to replace the bulb. any suggestions?How do you change the headlight on a 2007 GMC sierra pickup?Open the hood looking down at the top of the radiator support you will see two metal rods that go down through the support and through the head lamp assembly. turn the l shaped top out from under the retainer and lift them up and out. Now the headlamp should be free to pull out to get to the back of the assembly.How do you change the headlight on a 2007 GMC sierra pickup?Look in your owners manual and it will tel you the steps. Here are some basic instructions :remove the blocking parts, remove retaining ring, remove bulb and wiring, Reverse to install. Avoid touching the bulb with your fingers as the oils from your skin can cause hot spots so remove any finger prints with alcohol.

    How Do I Change The Headlight Bulbs on '03 Ford Explorer?

    Actually, it'sm an '03 Mountaineer. I but new bulbs. It it a do-it-yourself job, or do I need to go to the dealer? If I can do it, how do I do so?How Do I Change The Headlight Bulbs on '03 Ford Explorer?You can do it your self. Open the hood and look at the back of the light. Turn locking ring counter clockwise and slide it back on the wires. Then just pull the bulb out and un plug it. When you put the new one in make sure you don't touch the glass bulb with your fingers when reinstalling it. Oils on your hands getting on the bulb can cause the bulb to fail pre- maturely. Reverse procedure for installation

    I am trying to change the headlight in my aunts 93 ford escort?

    i am trying to change the headlight in my 93 ford escort and i can get the wiring off the back of the bulb but it seems if there is a plastic band that needs to be unscrewed?? maybe?? but it wont budge hardly any at all. any help?!!? and thanks in advance!!!I am trying to change the headlight in my aunts 93 ford escort?The plastic retainer ring is a 1/3 turn cam lock, twist it hard and it will get over the lock position and then move freely when it stops it will slide off the headlight housing and you will be able to change the bulb. When you reinstall it it will also be a little tough to pop into the lock position.

    How to change headlight bulb on 04 celica?

    i need help changing the headlight bulb on my celica How to change headlight bulb on 04 celica?look in the owners manual it will tell you !How to change headlight bulb on 04 celica?You have to replace the whole headlight, you cannot replace just the bulb. Sorry, too new of a car.

    Call around to get the best price possible because it might cost you a pretty penny.

    P. S. It might be a good idea to check for a loose wire at your headlight first and save yourself some money.

    How can I change out my headlight bulbs in my 01 Jetta?

    I know what bulbs to get I just am not too sure what is necessary to change out the bulbs..I've looked at diagrams online and none have been much help.How can I change out my headlight bulbs in my 01 Jetta?There is a large plastic cover on the back of your headlight assembly. It is held on by 2 spring reatainers that you pry off. There you wll find the headlight bulb. You have to twist off the retaining circle or just twist the bulb and socket at the same time. Then unplug the bulb from the harness. Make sure you are paying close attention to the orentation of the bulbs, as they will only fit back in the assembly one way.



    Put the lid back on and pry those spring retainers back over the lid to secure it.How can I change out my headlight bulbs in my 01 Jetta?if you look in the owners manual it actually states, %26quot;take to dealership%26quot; when you look up how to change it. in the Chiltons book it shows you how. it is a little tricky without breaking the plastic cover. when you get it off you turn the light bulb 1/4 turn to pull out. I believe they tell you to take it to the dealership because of getting moisture in there. once you remove the plastic part you are breaking the seal. How can I change out my headlight bulbs in my 01 Jetta?Im no professional but it should give you step by step directions in the drives manual or if your like me and say I don't need directions its probably a clip of some sort that u pull out then take out the light bulb.



  • email
  • shared hosting
  • How on Earth do you change the headlight in an 03 Chevy S-10??

    There is a steel plate behind the headlight assembly which makes it virtually impossible to access the twist thingy that holds the halogen headlamp. What am I missing?How on Earth do you change the headlight in an 03 Chevy S-10??you may find either a piece of plastic or metal that will slide up and allow you to move the headlamp assembly forward and out so that you can get access to the bulb.How on Earth do you change the headlight in an 03 Chevy S-10??I may be wrong, but there should be 2- 7mm headed bolts sticking up that you remove. They kinda look like maybe they are to adjust it, but look close and you'll see the adjustment bolt 'way further down. Pulling the 2 bolts lets the whole %26quot;bucket' come out

    How do I change the headlight on my '92 Toyota Corrolla?

    I am not very mechanically inclined, but as I am stretching cash lately, I am hoping that I might be able to do this myself.How do I change the headlight on my '92 Toyota Corrolla?Go to pepboys and buy the headlight bulb there, they install for you.



    If you're changing the entire headlight, you have to take off the grille (the thing on the front of the car with the toyota symbol on it), usually has 3 screws you unscrew to do that. Then, you have to unscrew the nut for the parking lights (they're the lights next to the headlights on the outside), and slide those off. There should be some nuts where you removed the parking lights, unscrew those, and unscrew anything else attached to the headlights. They pop right off when there's no more screws attached, and you put the new ones in where the old ones were.



    If you cant do it yourself, find someone who is mechanically inclined, it takes 20 minutes to do. It's very straight forward, I have a 94 corolla, and while they're different model years it should be the same concept.

    How do I change the headlight bulbs on a 97 chevy blazer?

    i just got 2 bulbs, and have absolutely no idea how to get down into the back of the lamp. i opened the hood and i think i need to take off the grill but when i take off all of the bolts, it still stays in place. what do i do??????How do I change the headlight bulbs on a 97 chevy blazer?the whole big thing comes out. unscrews, then unsnapsHow do I change the headlight bulbs on a 97 chevy blazer?Im not sure what the headlight looks like from the view under the hood, but in my 03 tahoe, you have to move one prong to the left and one prong to the right then the bulb can be removed.

    Change headlight bulb 2001 Focus?

    Hi all - I need to change the headlight bulb, have read the instructions and also some online stuff, I just can't seem to get the clip to move too much and I don't want to break anything. I know the clip pivots at the bottom, can anyone provide an accurate description of how to swivel it please? If anyone has a diagram (better than the one in the manual) that would be way cool. Thank you!Change headlight bulb 2001 Focus?What clip? I thought you would just reach behind the light and twist the locking ring counter clock wise and just pull the bulb out attached to the plug. Then just unplug it. Install new bulb....Be careful not to touch the glass on the bulb reinsert it and twist locking ring clock wise to lock it back in place.

    From what you said it sounds like your trying to remove the whole headlamp assembly.

    How do you change headlight 2005 dodge grand caravan?

    You have to remove the Headlight Module (lens assembly) before you can access the bulb. It's explained very well in your Owner's Manual. If you don't have one, you can download a PDF copy of it here;

    http://www.dodge.com/en/owners/manuals/i

    Starting on page 416 in that version. The exact page may vary if you look in an original paper manual.How do you change headlight 2005 dodge grand caravan?open hood reach over twist housing try and not hold the new bulb bear handed or type into search box

    how to replace headlight dodge caravan

    they twist out from behind easy
  • client time
  • what kind of snakes are
  • How do I change my own headlight and what tools do I need?

    I am sick of waiting on people to do it for me. What tools do I need and how should I go about doing it. I heard that if I touch a headlight with my hands, the grease can make it explode, is that true?How do I change my own headlight and what tools do I need?It depends on what kind of lighting system you have. The older sealed beam types you replace the whole lamp assembly. There is either a round or square chrome retaining ring around the headlight with 3 or 4 phillips head screws that must be removed from the front. Usually not too difficult but on some vehicles you may have to remove some of the grill work to get to them. Just be sure you don't mess with the 2 adjuster screws, (Top and Side) On the newer style where only the bulb is replaced, you have to remove them from the backside. There should be a locking plastic collar that has to be twisted to the left until it releases. You should then be able to pull the bulb and connecting wires straight back and remove the wires from the bulb. The bulb is held in place by a rubber O-ring and may take a little effort to remove. You then push the new bulb into the socket making sure the flat part of the electrical connector is facing up. You should feel it click into place. Replace the plastic retaining ring and plug the wire back into it. Changing the bulb itself is not that difficult but getting to them can be. It's not uncommon to have to remove your battery or air intake to gain access. As for touching the bulb, it probably won't make it explode but the oils from your skin will make a %26quot;hot spot%26quot; and cause it to burn out prematurely. Don't touch it with bare skin. Use gloves if need be.How do I change my own headlight and what tools do I need?should only need a screwdriver, just take the outside bracket off and go from thereHow do I change my own headlight and what tools do I need?they do say that, but after 20 years of changing head lights its never happend!How do I change my own headlight and what tools do I need?http://autorepair.about.com/cs/troublesh



    First raise your hood and see if you can grasp the base of the bulb where the wire connector plugs into it. If you can't get your hand in there and have enough strength to remove the connector and twist the bulb out, then sometimes the battery or other obstruction has to be removed to get at the bulb.How do I change my own headlight and what tools do I need?Do not touch the glass part of the bulb, this could make a hotspot and the bulb cold blow.

    Normally the bulb is replaced from behind and quite often no tools are required.

    Can someone please tell me the easy way to change headlight bulb on 1998 concorde?

    Yes, Roby, They're on the front landing gear.

    But, seriously, the first answer is correct. The headlight bulb is just a little bulb, about the size of a finger, which is inserted into the back of the big plastic headlight bucket (which some people who remember sealed beam headlights may think is the bulb.) Give it a quarter turn, and pull it out. Disconnect the bulb from the plug, plug the new one in. Stick it in, and give it a quarter turn. no need to aim, or adjust anything. Couldn't be easier.Can someone please tell me the easy way to change headlight bulb on 1998 concorde?I believe you just reach to the rear of the headlamp, twist the bulb and then remove it. On reinstallign the bulb, be sure not to touch it with your hand or fingers. Body oil will cause it to blow out again.Can someone please tell me the easy way to change headlight bulb on 1998 concorde?concorde? the airplane? it uses light bulbs?

    i really did not know !!!

    How do i change the headlight in a 1998 mercedes c280?

    i know the assembly is removed from the rear of the headlight housing. Do i remove the air filter intake or remove the headlight housing? If either, how?

    Thanks.How do i change the headlight in a 1998 mercedes c280?it can be done without removing anything...it's just a pain....if you choose to remove one of the two,go for the air filter housing....it's allot easier....do not mess with the head light assembly,they are a little tricky and you could scratch the car....How do i change the headlight in a 1998 mercedes c280?It really depends on the size of your hands. If you have smaller hands, getting in and accessing the bulb is relatively easy compared to if you have larger hands. Yes, you can remove the air filter intake and the top of the air filter housing if that makes it easier for you but it may not be necessary.



    As noted above, do not remove the entire housing. The back of the housing is plastic and if anything breaks, you have to buy a complete assembly as the housing only is not available separately.

    How do i change a headlight bulb on a 2000 Honda Civic?

    i have to finish this little project in 3 hours. please help.How do i change a headlight bulb on a 2000 Honda Civic?turn the headlamp switch off.

    disconnect wires from the back.

    remove rubber grommet.

    release the clamps holding bulb.

    replace bulb. do not touch the bulb glass, hold it on the base.



    secure bulb with clamps.

    return the rubber thing,

    connect wires.

    light it up.How do i change a headlight bulb on a 2000 Honda Civic?Remove the casing at the back of the headlight.Usually there are clamps to hold the casing.

    Disconnect the wires. remove the bulb n fit the new one in its place.connect the wires .

    ON the headlights n see if the projection is OK. if not adjust it a little until to have the satisfactory beam.

    Do not touch the glass portion of the new bulb.How do i change a headlight bulb on a 2000 Honda Civic?Need to gain access to back. Twist ring and remove bulb. Just be sure to wipe with alcohol to remove fingerprints from bulb or will not last. If any doubt, Take to Auto Zone or a Kragen and they will show you for free.

    How do I change The headlight assembly on a Honda Odyssey?

    Can this be done without removing the bumper?How do I change The headlight assembly on a Honda Odyssey?You have to pull the front bumper cover.Not really the end of the world,most DYIers can handle it.Take some pictures of it from all angles before you take it apart and you'll be fine.
  • what could be wrong near my printer
  • cat
  • How do i change the headlight for my ford probe?

    it has pop up lights and plus if a pop up light is broken how do you fix it.One of the lights won't pop up I can make it come up by twisting some white white under the car.How do i change the headlight for my ford probe?What year is the car? The link below as you can see is for the '91 ford probe. The best way is to take it to you dealership and let them change it.How do i change the headlight for my ford probe?thats easy well first u get ur tool and take out ur tha 4 screws that hold tha light in place and than take out tha set screws after that u should be able to pull tha light out and than unplug it and put in the new one and put tha rest back togther like u took it out ull need a plat head and a philups

    How do I change the headlight assembly in my 00 dodge durango?

    The more detailed the better and pics would be awesome!!How do I change the headlight assembly in my 00 dodge durango?look very closely at the headlight the whole thing comes off with corner lamp and turn signals there are three bolts you will need a socket long extension and a ratchet take off the three bolts and then pull the assembly off it will be hard it has a suction bracket after that replace the bulb and do it again to the next sideHow do I change the headlight assembly in my 00 dodge durango?I have done it but didn't take pictures. There are a few screws accessible from the front and then the whole assembly can be pulled off.How do I change the headlight assembly in my 00 dodge durango?There are two methods. 1.) It is possible to maneuvre your hand to the lock ring on each headlight assemble from inside the engine compartment. You must work %26quot;blind%26quot; -- by feel only. The lock ring rotates 1/4 turn to unlock. On the side of the engine with the battery, you must remove the front portion of the plastic battery box. 2.) This method is much easier. Three bolts (one at the top, two on the bottom) that hold the headlight assembly to the vehicle. Look directly at the headlight, and look in the gap between the top of the headlight and the vehicle fender, and also at the gap between the bottom of the headlight and the vehicle bumper. With the aid of a light, you should be able to see all three bolts. Using a socket and an extension to your ratchet, remove the bolts, pull out the headlight assembly, and remove the lock ring. TAKE CARE TO HANDLE THE HEADLIGHT ASSEMBLY GENTLY so as to not alter the setting of the headlight in respect to the headlight frame. By taking care, it will not be necessary to have the headlight(s) adjusted (for aim).













    Hope that helps and best of luck.

    Wednesday, September 14, 2011

    How do i change a headlight on a toyota emina?(estima) and is it difficult?

    i have bought a new headlight for my car (toyota emina) estima p reg) as my old one has gone cloudy and will be a mot failure, how do i change it over and is it really difficult to do?How do i change a headlight on a toyota emina?(estima) and is it difficult?It's really a super easy project. I'd suggest getting a specific Toyota manual for your car. Pick up a Haynes or Chilton's repair manual from NAPA, Carquest, Auto Zone or Advance Auto for step by step instructions. Your public library may have one of the two manuals or better yet a Motors Manual. The entire plastic headlight bucket can be removed without changing the aiming adjustment. Then the plastic headlight has been removed it's easy to change the bulb or the plastic aiming bucket.



    All you need is a few metric sockets, short 3/8 extensions and a 3/8 ratchet.

    How to change headlight bulbs on 2001 Jeep Grand Cherokee?

    It has the halogen capsule. You have to remove the lock ring that holds it in place. For your information, for many parts you will need to know what series your vehicle is. Is it a limited series?? Do you know? Better find out because the parts will NOT interchange. You can go to napaonline.com for all you car parts needs; this way you will understand what those of us in the business need to know. That being said, you may have to remove the battery depending on what side the bulb is on, and if they left you enough room when they built the darn thing. DO NOT FOR ANY REASON touch the bulb (new one), with your bare hand. Either wear a latex glove, or handle it with a paper towel. Halogen bulbs heat up very fast. The oil from your skin will transfer to the glass and when you turn the headlights on, it can cause the bulb to burst. This will void the warranty so if it happens, please do not try to return it as defective!How to change headlight bulbs on 2001 Jeep Grand Cherokee?You drive to the nearest Chrysler/Jeep dealer,

    give your keys to the guy with the greasy hands and say %26quot;Replace the headlight bulb, Please.%26quot;



    Take your Daddys credit card with you, you will need that, and don't forget to say %26quot;Thank you.%26quot; when he fixes you car.

    On a 2002 Buick Rendezvous - How do I change the low beam headlight bulb?

    Do I remove the headlight assembly to change it , if so how? Is it accessed some other way?On a 2002 Buick Rendezvous - How do I change the low beam headlight bulb?yes open the hood and the assembly should have 2 white or black plastic clips on it. Pull the clips up and the assembly should come right out.On a 2002 Buick Rendezvous - How do I change the low beam headlight bulb?no pop your hood and do it from the inside
  • How to make a babys quilt
  • private myspace
  • How do i change the headlight bulb on a 1999 yamaha v-star?

    There are 3 screws around the face, but i found that they are to adjust.How do i change the headlight bulb on a 1999 yamaha v-star?should be one big steal ring aroundhead light with one screw re move ring an pop head light housing out an replace howigen buib an dont get finger prints on bulb wont last as long

    How do I change the headlight bulb for my 2000 Toyota Solara?

    I have the replacement bulbs, I jsut cannot figure out how to remove the existing bulbsHow do I change the headlight bulb for my 2000 Toyota Solara?The front bumper cover probally has to come off to do this, I have had to do this on mazda's.



    Tip: If you have to do this get 4 short bungie cords and hang bumper off these bungies so paint wont get scratched, like hole in top of bumper cover to somewhere by fender. If you do this bumper just hangs there also makes it easier to put on.How do I change the headlight bulb for my 2000 Toyota Solara?Very carefully with your hands!How do I change the headlight bulb for my 2000 Toyota Solara?I suggest to approach an auto mechanic

    How do I change the Headlight on my '03 Lancer?

    I can get the buld out of the light but i cannot get it out of the harness connecting it to the car. Do you just have to pull really hard or is there a trick. Thanks.How do I change the Headlight on my '03 Lancer?you have to pull really hard......How do I change the Headlight on my '03 Lancer?there is a clip on the harness that is clipped on the bulb, that needs to be lifted up, then pull apart...How do I change the Headlight on my '03 Lancer?You just gotta pull really hard, they are made so they hang in there during drive.How do I change the Headlight on my '03 Lancer?i've just changed the bulbs for my friend's 03 lancer yesterday. Just forget about what the owner's manual says. the book doesn't tell the exact instructions(I threw mine out, I also own a 03 lancer)you have to do it yourself. Now, stick your hand in there. there's a clip that is connected to headlight, unclip it from the headlight. twist(don't pull it hard like what others are telling you) the piece that holds the bulb to the left and you'll feel the click and pull it out. this should take you about 5 minutes to complete the job.Hope this helps.

    Why would I have to change the headlight in my car so often?

    It's been 8 times in the past 18 months.....I drive a 1999 Honda Civic. Is this normal or could there be something wrong?Why would I have to change the headlight in my car so often?If you touch a halogen bulb and get oil or grease on it, it won't last very long. Instead, hold it with a dry rag or newspaper.Why would I have to change the headlight in my car so often?Not sure about your car but my camaro, would switch headlights, i would put one in and the other one would blow and this continued until i found out when you replace head lights make sure you disconnect the battery.I dont know if this will help you but its worth a try.Why would I have to change the headlight in my car so often?Had the same problem on my Corolla. Not sure was it was but a couple of things to consider. Wear a latex glove so that your skin doesn't touch the bulb. Skin oil can diffuse through the quartz into the bulb and oxidize the filament causing it to burn out. Also, the light should be clean and dry. If there is a leak moisture could be getting into the light. Another problem may be a bad connection causing the bulb to see higher than normal voltage and burn out early. This needs an electrical check by a good auto electrician.Why would I have to change the headlight in my car so often?Sounds to me like you have an electrically system problem. My 1999 Nissan Sentra was doing the same thing plus my headlights would randomly shut off while I was driving! Anyway go to a mechanic that you can really trust and have them check your electrically system. All they do is plug some machine into your car and it pin points what the problem is. Good luck!Why would I have to change the headlight in my car so often?CHECK THE WIRES FOR GROUNDING POINTS(BARE WIRES TOUCHING THE FRAME OR BODY) I HAVE ALWAYS FOUND THAT REPLACING BOTH HEADLIGHTS AT THE SAME TIME HELPS. I WOULD PUT MY MONEY ON A GROUNDING ISSUE

    Where can I find step by step instructions on how to change a headlight bulb on a 98 chevy silverado?

    I have to keep my lights on bright because the passenger dim bulb is out.Where can I find step by step instructions on how to change a headlight bulb on a 98 chevy silverado?open the hood, and on the radiator support, you will find two holes over each headlamp Assembly. look down the holes with a lite, and you will see a hex head bolt. loosen both bolts on each headlamp and the capsule will come in your hand. the rest is self explanatory. good luck.Where can I find step by step instructions on how to change a headlight bulb on a 98 chevy silverado?get a Chilton manuelWhere can I find step by step instructions on how to change a headlight bulb on a 98 chevy silverado?at chevy.comWhere can I find step by step instructions on how to change a headlight bulb on a 98 chevy silverado?In your owners manual there is a section on bulb and fuse replacement.Where can I find step by step instructions on how to change a headlight bulb on a 98 chevy silverado?Open the hood, remove the battery to make it easier. Look behind the headlight thru the radiator support, the bulbs are visible. Disconnect the wire adapter and twist the bulb for it to be released. The part number for the low beams is 9006 and 9005 for high beam. Good luck....Where can I find step by step instructions on how to change a headlight bulb on a 98 chevy silverado?Go to the library and look in a motor book for your make and model and it will tell and show you.
  • computer wont start up
  • more domestic oil
  • How do I change the headlight bulb in my 2002 Subaru Forester?

    I can't disconnect the electrical connector from the lightbulb itself. How does one do this?How do I change the headlight bulb in my 2002 Subaru Forester?Did you get the bulb to come out of the headlamp housing?



    There is a little piece of metal holding down the bulb that looks like a twisted paper clip...press on the raised end to release the clip and you will be able to pull the bulb out.



    While it would be easier to get at if you disconnected the electrical connector, this is not really necessary. Try pinching really hard on the connector to release it as it will not release if you only pull on it.How do I change the headlight bulb in my 2002 Subaru Forester?The owner's manual should have complete instructions.

    How do you change your headlight assembly in your Chevy Colorado?

    Notice: Avoid touching the bulb or letting the bulb come in contact with anything damp. Oil from your skin or moisture on the bulb can cause the bulb to explode when the bulb is turned on. If either comes in contact with the bulb, clean the bulb with alcohol or a suitable degreaser and wipe the bulb dry.



    Ensure that the headlamp switch is in the OFF position.

    Ensure that the ignition switch is in the LOCK position.

    Remove the front grille.

    Remove the bolts that retain the headlamp.







    Push and rotate the park lamp, high beam headlamp, low beam headlamp, or the DRL, Park and turn signal, and front side marker bulb 1/4 turn counterclockwise in order to remove the bulb.

    Disconnect the electrical connector.

    Installation Procedure









    Connect the electrical connector to the bulb.

    Push in and rotate the park lamp, high beam headlamp, low beam headlamp, or the DRL, Park and turn signal, and front side marker bulb 1/4 turn clockwise in order to install the bulb.





    Install the bolts that retain the headlamp.



    Tighten

    Tighten the bolts to 10 N路m (89 in lb).



    Inspect the headlamps for proper operation.

    Install the front grille.How do you change your headlight assembly in your Chevy Colorado?Drop by your local GMC or Chevy store and ask for one of the shop service personnel to show you how. You can also call Chevy at 1-800-222-1020How do you change your headlight assembly in your Chevy Colorado?it unbolts from the back of it,,remove all the bolts,,and the wiring harness from it,,and remove it,,installation,,is the reverse of this,,be care full the new one may try to bind on you,,take your time doing it,,and you,ll be ok with it,,good luck,,i hope this help,s.